Shopping Cart:
0 items

CSM Carb Smart

CarbSmart is used in conjunction with a servo connected to the main needle of the carburettor to adjust the mixture in flight dependant on the cylinder head temperature. The unit has a user selectable target temperature. When the head is below the target temperature the unit moves the mixture towards the leaner direction. The extent to which this is allowed is again user adjustable. As the head reaches the target temperature the mixture is richened to the standard setting and as the head temperature exceeds the target value the mixture continues to richen until a user adjustable limit is reached. The gain of the system is also user adjustable.

Features:

Controls fuel mixture by monitoring cylinder head temperature

Simplifies mixture adjustment

Helps protect engine

Makes mixture less critical to weather changes

Allows higher, more consistent, power output

Supplied with sensor, power lead, mounting foams and throttle arm. Requires a servo and linkage for use, does not require a radio channel.

Smart carb Works off a temp sensor placed in cylinder head and operates via a servo connected to main needle. No extra RX channel needed - just power supply via Y-lead etc.

Full adjustable Gain, full lean - Centre / Failsafe - Full Rich servo positions. 90 - 125 degrees C operating range. 100c for running in. 110 for maximum service life of engine. 115c for max power

Please note: the Smart Carb supply must not be plugged into the battery/DSC port on your RX, please us a spare channel or Y-lead.

Kit includes:
Temp sensor
Smart Carb unit
Mounting foams
Engine needle bracket
Power lead

Other necessary equipment:

Hitec HS65HB servo x 1 (NOT included)